Diagnosis and exclusion on power-on failure at startup

Description: After pressing the power button, server front control panel indicator (power-on status indicator, hard disk status indicator) is off, meanwhile, no KVM (display) output is displayed, and server chassis fan does not rotate.

Operation steps:

a、Verify whether machine power supply is normal or not: If power module indicator is on, it indicates normal power supply; if power module indicator is off, please check if power supply is normal;

b、If power supply is normal, plug in and off the power module again to test, and then start for verification;

c、If there’s a machine and a power module of the same type, you could change the power module to test whether there’s a power module fault;

d、If no solution could be achieved via the above operation, please contact the distributor customer service.

 Diagnosis And Exclusion Instructions  
Total 0 Votes:
0

Tell us how can we improve this post?

+ = Verify Human or Spambot ?

Add A Question !

You will get a notification email when Knowledgebase answerd/updated!

+ = Verify Human or Spambot ?

Contact Us

Add A Question !

You will get a notification email when Knowledgebase answerd/updated!

+ = Verify Human or Spambot ?