Key Features:
- Extreme performance: CPUs of up to 28 cores and 56 threads, and max 205W TDP
- 16GB 24* 2666 MT/ s NVDIMM memory
- 12* hot swap NVMe SSD
- 2* dual-width GPUs each delivering 20 trillion FP16 performance
- Flexible expansion: up to 48* 2.5”/3.5” hard drives, 12* U.2 NVMe SSD, 2 built-in M.2 SSDs
Overview
Inspur NF8480M5 is a high-end 4-Socket server based on Intel® Xeon® Scalable Processor, providing powerful computing capability, high scalability and excellent RAS features. It is ideal for in-memory database, ERP, CRM, data analysis, virtual machine and data-intensive applications.
Features
Extreme Performance
NF8480M5 adopts the brand-new intelligent computing acceleration technology to provide better performance according to user’s application. It supports all kind of high performance technologies and features such as:
- Intel® Xeon® scalable processors, with CPUs of up to 28 cores and 56 threads, and a maximum TDP of 205W
Up to 48* 2,933MHz DDR4 ECC RDIMM or LRDIMM memories with high speed, high availability and up to 6T memory - 12* hot swap NVMe SSD and full flash configurations. This server provides up to 7.5 million+ IOPS, and with this extreme storage I/O brings qualitative leap of the storage performance.
- 2* dual-width GPUs with a single GPU providing 20 trillion FP16 floating-point computing performance which bring exciting possibilities for deep learning application.
Flexible Expansion
Inspur NF8480M5 supports up to 24* 2.5”/3.5” storage devices (maximum 12* NVMe SSDs included) and 2 built-in M.2 SSDs, which can be used as OS boot drive. With 15* PCIe3.0 slots and 1* OCP slot, NF8480M5 is perfect for the demanding workloads requiring high performance and flexible configurations.
Stability and Reliability
It adopts the innovative E-SRA architecture with BMC software dual-level write protection, and independent BIOS refreshing through BMC, which ensures a safe and reliable firmware upgrade.
It leverages IMD enhanced memory protection and PCIe hot swap technology.
The system adopts the new generation LIDS (optic channel diagnosis system) and DSFI (deep system failure insight) technology which can have real-time full access to underlying faults information, therefore greatly improving troubleshooting efficiency and accelerating the system fault recovery.
| Model | NF8480M5 |
|---|---|
| Form Factor | 4U Rackmount, 448.0mm (W) * 175.5mm (H) * 812mm (D) |
| Processor | 2 or 4 new generation Intel® Xeon® scalable processor, TDP 205W |
| Chipset | Intel® C620 Series Chipset |
| Memory | Up to 48 DIMMs, with the maximum memory frequency up to 2933 MHz Supports RDIMM / LRDIMM, NVDIMM and Optane™ PMem |
| Storage | Up to 24*2.5/3.5-inch SAS/SATA Drives Up to 12*U.2 NVMe SSDs 2 built-in M.2 SSDs, and soft RAID 0/1 |
| Disk Controller | Supports 12G RAID card, RAID0, 1, 10, 1E, 5, 50, 6, 60, etc., Capacitor Cache protection Provides RAID status migration and RAID configuration memory |
| Expansion | Up to 16 PCIe3.0 slots and 1 OCP slot |
| Front I/O | 2 USB 3.0 interfaces, 1 VGA interface, 1 RJ45 system serial port and LCD diagnostic display |
| Rear I/O | 4 USB 3.0 interfaces, 1 VGA interface, 1 special MGMT port, 1 BMC diagnosis serial port and 1 system serial port |
| Network | Supports 40-gigabit; CP NIC card and OCP PHY card, and NCS for OCP A Supports network advanced characteristics including wake-up on LAN, network redundancy and load balancing |
| Management | Supports remote management control, such as IPMI2.0, KVM over IP, SOL and SNMP 1 rear BMC special MGMT port and 1 BMC diagnosis serial port for off-line fault diagnosis |
| Safety | TPM2.0 with LPC & SPI interfaces |
| OS | Microsoft Windows Sever, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, CentOS, Vmware ESXi, etc |
| Certification | CCC, CE, FCC, CB, UL, KC, RCM and BIS |
| Power Supply | Supports full power grid AC inputs, 240/336V high voltage DC input and -48V low voltage DC input Supports platinum-level 550/800/1,300/1,600W CRPS power supply module, and 1+1/2+1 /2+2/3+1 redundancy |
| Working Temperature & Humidity | 5 – 35°C 20%-80%RH |
| Performance benchmark | SPEC official result Best application: Intel Xeon Platinum 8270 ; Intel Xeon Gold 6230N ; Intel Xeon Gold 6252 |